Sony M-727V Service Manual page 2

SERVICING NOTE
Flexible Circuit Board Repatring
© Keep the temperature of the soldering iron around 270
°C during repairing.
e Do not touch the soldering iron on the same conductor
of the circuit board (within 3 times).
@ Be careful not to apply force on the conductor when
soldering or unsoldering.
Notes on chip component replacement
e@ Never reuse a disconnected chip component.
@ Notice that the minus side of a tantalum capacitor may
be damaged by heat.
SECTION 1 This section is extracted from
e Parts Identification
EAR
FAST
PB
TAPE
SPEED»
TAPE
COUNTER
instruction manual.
GENERAL
MIC (PLUG IN POWER)
MICROPHONE
REC/BATT
CUE MARKER
@
tte PAUSE
44 CUE/REVIEW >>
mA
VOR