Toro TimeCutter ZS 4200T Operator's Manual page 33

Changing the Engine Oil and Oil
Filter
Service Interval: After the first 5 hours/After the
first month (whichever comes
first)—Change the engine oil and
filter.
Every 100 hours or yearly, whichever comes
first—Change the engine oil and oil filter (more
often in dirty or dusty conditions).
1. Park the machine on a level surface to ensure
that the oil drains completely.
2. Disengage the blade-control switch, and move
the motion-control levers outward to the P
position.
3. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
4. Drain the oil from the engine
ARK
(Figure 43).
33
Figure 43
g027799
g029570