Features; Warning; Precautions; Notes On Installation - Sony PS-X6 Owner's Instruction Manual

FEATURES
PS-X6, PS-X7 FEATURES
@ Automatic turntable—auto start, auto stop, auto return, and
auto repeat functions are activated by merely touching the logic
controlled START/STOP switch and the REPEAT switch.
@ The Crystal Lock System maintains the turntable at an accurate
nominal speed under voltage or temperature variations or aging.
and shows excellent initial drift and load/speed characteristics.
e@With a newly developed BSL. (brushless and slotless) Motor
having a torque of 1 kg-cm, excellent starting characteristics with-
in a third revolution at 33 1/3 are obtained.
@A servo system, which consists of a turntable with a magnet
coated rim and an 8-pole magnetic pick-up head, and the BSL
Motor free from torque irregularity, assure minimal wow and
flutter and a high signal-to-noise ratio. The turntable attains
nominal speed almost immediately after changing from 33 1/3 rpm
to 45 rpm or vice versa.
e@Luminous Sensor (photoelectric circuit) is employed for a
smooth arm return, which eliminates mechanical force on the
cartridge or tonearm.
@ The automatic operation system is designed so as not to affect
the tonearm if you accidentally touch it while it is moving in the
auto start or auto return mode, or in case you change the record
size selector position during an operation mode.
@ Acoustic material SBMC (Sony Bulk Mold Compound) is used
in the constructions of the frame, to reduce outside vibration
effects to a minimum.
@ Newly developed resilient feet effectively prevent acoustic feed-
back.
ADDITIONAL PS-X7 FEATURE
@ An arm pipe made of carbon fiber suppresses resonance inter-
ference.
@ Fluid-filled rubber mat absorbs any disc vibration.
WARNING
PRECAUTIONS
e@ Check that the operating voltage for your unit is identical with
that of your local power supply.
@ Should any liquid or solid object fall into the cabinet, unplug
the unit and have it checked by qualified personnel before
operating it any further.
NOTES ON INSTALLATION
@ Place the turntable on a level surface.
@ Avoid placing the unit near electrical appliances (such as a
television, hair dryer, or fluorescent lamp) which may cause hum
or noise.
@ Avoid any vibration such as from speakers, slamming of doors,
etc.
@ Keep the unit away from direct sunlight, extremes of tempera-
ture, or excessive dust and moisture.
@ Allow 10cm (4inches) clearance behind the unit so that the
cover can be opened.
—
425mm (1634inches)
| - = =
We 2 425mm (16%inches)
Resilient Foot