Sony HT-SF2000 Operating Instructions Manual page 41

• DUAL (Digital broadcast
language selection)
Lets you select the language you want to Iistan
to during digital broadcast. This featm'e only
functions for Dolby Digital sources.
• DUAL M/S (Main/Subt
Sound of the main language will be output
through the front left speaker and sound of
the sub language will be ompm through the
front right speaker simultaneously.
• DUAL M (Main)
Sound of the main language will be output.
• DUAL S (Sub)
Sound of the sub language will be output.
• DUAL M+S (Main + Sub)
Mixed sound of both the main and sub
languages will be output.
• A.V. SYNC. (Synchronizes audio
with video output)
Lets you delay the audio output so that the
time gap between the attdio output and visual
display is minimized. You can adjust from 0 (0
ms) to 20 (200 ms) in 1 (10 ms) steps.
Notes
• This parameter is useful when you use a large L(D
or plasma monitor or a projector.
• This pm'ameter is not valid when the multi chmmel
PCM signals are received via a HDMI IN jack.
• D. ASSIGN (Digital audio input
assignment)
Lets you assign the digital andio input to other
input source. For details, see "Listening to
digital sound from other inputs (DIGITAL
ASSIGN)" (page 57).
• IN MODE (Switching the audio
input mode)
Lets you set the audio input mode of inputs.
For details, see "Switching between digital
and analog audio (IN MODE)" (page 541.
Settingsfor thevideo
(VIDEOmenu)
You can use the VIDEO menu to make various
adjustments for HDMI settings.
Select "'6-VIDEO" in the amplifier menus. For
details on adjusting the parameters, see
"Navigating through menus" (page 34) and
"'Overview of the menus" (page 35).
VIDEO menu parameters
• AUDIO (HDMI AUDIO)*
Lets you set the HDMI audio output from the
playback component connected to the receiver
via a HDMI connection.
• AMP
The HDMI audio signals from the playback
component is only output to speakers
comaected to the receiver. Multi-channel
sound can be played back as it is.
Note
Audio signals are not output from the TV's
speakers.
• TV+AMP
The sound is output from TV's speaker and
the speakers connected to the receiver.
Notes
• The sound quality of the playback component
depends on the TV's sound quality, such as the
number of channels, and the sampling
frequency, etc. When the TV has stereo
speakers, the sound output from the receiver is
also stereo as that of the TV, even if you play
multi-chmanel software.
• When you connect the receiver to a video
component (projector, etc.), sound may not be
output from the receiver. In this case, select
"AMP".
3
O
"O
ID
continued_
41ss