Sony FD Trinitron WEGA KV-32XBR400 Operating Instructions Manual page 49

Troubleshooting
Problem Possible Remedies
No picture _1 If your TV does not turn on, and a red light keeps flashing, your TV may
(screen not lit), no sound need service. Call your local Sony Service Center.
_.J Make sure the power cord is plugged in.
:..! Push the power button on the front of the TV.
,.J Check to see if the TV/VIDEO setting is correct: when watching TV, set to
TV, and when watching connected equipment, set to VIDEO 1, 2, 3, 4, 5 or 6.
LJ Try another channel. It could be station trouble.
Remote control ;_1 Batteries could be weak. Replace the batteries.
does not operate ;.J Press TV(FUNCTION) when operating your TV.
Make sure the TV's power cord is connected securely to the wall outlet.
Locate the TV at least 3-4 feet away from fluorescent lights.
I_1 Check the orientation of the batteries.
Dark, poor orno _-3 Adjust the PiCture setting in the
video
menu (see page 26).
picture (screen lit), .3 Adjust the Brightness setting in the Video menu (see page 26).
good sound i.3 Check antenna/cable connections.
Good picture, _ Press MUTiN6 S0 that ';MuTiNG;; disappears from the Screen (see page 40).
no sound ,_.3 Make sure Speaker is set to ON in the Audio menu (see page 28).
Cannot receive upper Li Change Cable to OFF:(see page 30).
channels (UHF) when using Li Use Auto Program in the Channel menu to add receivable channels that are
an antenna not presently in TV memory (see page 30).
No color _ Adjust the Color settings in the
video
menu (see page 26).
Only snow and noise appear _ Check the antenna/cable connections.
on the screen _i Make sure the channel is broadcasting programs.
_1 Press ANT to change the input mode (see page 40).
Dotted lines _ Adjust the antenna..
or stripes Li Move the TV away from noise sources such as cars, neon signs, or hair-
dryers.
TV is fixed to one channel _ Use Auto Program in the Channel menu to add receivable channels that are
not presently in TV memory (see page 30).
_i Check your Channel Fix settings (see page 30).
Double images or ghosts _i Use a highly directional outdoor antenna or a cable (when the problem is
caused by reflections from nearby mountains or tall buildings).
Cannot operate menu _ if the item you war[t t0chooseappears in gray, y0u cannot select itl
cannot receive any _a_eis _ Use Aut0 Program in the ChaPel menu toadd receivable channels that are
when using cable TV not presently in TV memory (see page 30).
Check your cable settings.
Make sure Cable is set to ON in the Channel menu (see page 30).
46