Table of Contents
Advertisement
OPERATION
Before Use:
●
Carefully remove your humidifier from the carton, and take off all the protective
wrapping.
●
Select a location for your humidifier on a flat level surface about 4" away from
the wall. DO NOT place the humidifier on a finished floor or near furniture,
which can be damaged by too much moisture or water. Place on a moisture
resistant surface.
●
For first time use, place the humidifier in a room that represents normal
conditions. After half an hour, it can be operated.
●
Working temperature: 40-105 degrees Fahrenheit, relative humidity: ≤80%RH
●
Use water that is less than 105 degrees Fahrenheit (purified water is recommended).
●
Remove the water tank from the base of unit, open the cap and fill from
bottom with water.
●
Screws the water filter onto the water cap.
●
Close the cap with water filter connected and put the water tank on the base
correctly. DO NOT OVERTIGHTEN THE WATER CAP. To correct a water leak
problem from the cap, remove the silicon seal and replace it in the reverse
position after a period of use.
●
Put the nozzle in the notch of water tank and adjust the nozzle away from
walls and furniture.
●
Plug the humidifier into a 120V power outlet.
Using the Product
Power Switch
Turn on by pressing the On/Off button. The machine will start in the Hi Speed
mode. You can change the mode according to desired level of humidity and
function.
Accu-Smart® (A/S)
When using the Accu-Smart® Humidity feature, once the humidity reaches
65% RH the machine will stop producing a mist. Once the humidity level is
lower than 60% the mist will re-start.
WHD-120(完成).indd 4
1.
Power Switch
2.
Negative Ion
3.
Accu-Smart® Switch
4.
Mist Output/Sleep Mode Adjustment
5.
Humidity Display
6.
Sleep Mode Symbol
4
2009-5-13 13:15:07
Hide quick links:
Advertisement
Table of Contents
