Table of Contents
Advertisement
5 6
Seat s and s torage
If there are passengers in the rear seat, fold
the head restraints up on the occupied seats
at least to the next notch ¢
A .
Adjusting head restra ints
"' To move the head restraint up, hold it at the
sides with both hands and slide it upward
until you feel it click into place.
,,. To move the head restraint down, press the
button ® <=>
fig. 4 7
and slide the head re-
stra int downward.
Removing the head restraints
To remove the head restraints, the backrest
must be folded forward partially.
,,. Remove the screwdrive r from t he vehicle
tool kit¢
page 247.
,,. Release the backrest ¢
page 61 .
,,. Press the @ button ¢
fig. 47
and move the
head restraint upward as far as it can go
<=>
A .
,,. Place the screwdriver in position ® in the
opening, press the button @ and pull t he
head restraint out of the backrest at the
same t ime ¢ _&..
,,. Fold the backrest down until it latches se-
curely ¢
A
in Increasing the size of the lug-
gage compartment on page 61.
In st alling th e head rest raints
To install the head restraints, the backrest
must be folded forward partially .
,,. Release t he backrest¢
page 61.
,,. Slide the posts on the head restraint down
into the guides until you feel the posts click
into place . You should not be ab le to pu ll
the head rest raint out of the backrest.
,,. Fold the backrest down unt il it latches se-
curely ¢
A
in Increasing the size of the lug-
gage compartment on page 61 .
&_
WARNING
- Read and heed all WARNINGS
<=>
page 125, Proper adjustment of head
restraints
- Only remove the rear seat head restraints
when necessary in order to install a chi ld
seat. Install the head restraint again im-
mediately once the ch ild seat is removed.
Driving with the head restraints removed
or head restra ints not in the highest po-
sition increases the risk of serious injury .
Socket
Applies to vehicles: wit h socket
Electrical accessories can be connected in the
12 volt socket.
-· - , - ,- ,~ , - -
'
'
-i--
•
Fig. 4 8
Ce nte r co nsol e: front/r ear 12 volt socket
Fig. 49
Luggage compa rtm ent side trim panel : 12 volt
socket* (example)
,,. Remove the plug from the center console
socke t
c:>
fig. 48,
or
,,. Open the cover on the luggage compart -
ment socket* ¢
fig. 49.
"'I nsert the plug fo r the electrical device into
t he socket.
The 12 volt socket can be used for electrical
accessor ies. The power consumpt io n at the
outlet must not exceed 120 watts.
&_
WARNING
The socke t works only whe n the ign ition is
switched on . Incorrect usage can lead to
serious injuries or burns. To reduce the risk
of injuries, never leave chi ldren
~
Advertisement
Table of Contents
