Traxxas Fiesta ST Rally BRUSHLESS Owner's Manual page 12

BL-2s Wiring Diagram
12 • FIESTA ST RALLY
TRAXXAS TQ 2.4GHz RADIO SYSTEM
Your model is equipped with the Traxxas TQ 2.4GHz transmitter.
The transmitter has two channels: Channel one operates the
steering, and channel two operates the throttle. The receiver
inside the model has three output channels. Your model is
equipped with one servo and an electronic speed control.
TRANSMITTER AND RECEIVER
Red/Green Status LED
Set Button
Steering
Trim
Throttle
Trigger
Power Switch Battery Compartment
MODEL WIRING DIAGRAM
Antenna
Receiver
Steering Wheel
Steering Servo
Channel 1
BL-2S ELECTRONIC SPEED CONTROL
Accessory
Connector
not used
Motor
(BL-2s 3300)
BL-2s Electronic
Speed Control
Channel 2
Traxxas High-Current
CH3 - Channel 3*
Connector (Male)
CH2 - Speed Control
CH1 - Steering Servo to Battery
CH1 - Channel 1*
*not used
To Motor
Traxxas High-Current
Connector (Male)
to Battery
Set Button
To Receiver
LED