Table of Contents
Advertisement
SECTION 3: XLR Input Amps
For consistency, we suggest you use channels A and B (left most 5-pin
XLR) for Front Left and Right, and use channels C and D (right most 5-pin XLR)
for Rear Left and Right.
The GFA-4304, GFA-4404 and the GFA-4702 all use balanced inputs
terminated with professional 5-pin XLR connectors. Each
5-pin XLR connects
two channels (Left and Right) of signal, plus a shield to the amplifier. Hookup is
straight-forward, but you must select the correct GFY adapter. The following
diagrams (Fig. 5), are a listing of all the adapters available through ADCOM for
integrating any system with ADCOM car audio amplifiers and interfaces.
It is
vital to note the APPLICATION description! Specific adapters MUST
be used for specific applications!
>GFY ADAPTER CABLES<
APPLICATION: Adapts XLR(2 ch.) input to accept
mono RCA-type input and run amp in MONO
Fig. 5 (part 1)
Advertisement
Table of Contents
