Western Digital My Book WDH1Q10000 User Manual page 22

RAID Status Messages
WD RAID Manager reports the following messages depending on the current status
of your drive.
Displayed Status
Text
Healthy
Setting Mismatched
Degraded
RAID Status
Rebuilding
Bad
Description
Array is properly
configured and operating
normally.
Drives from different
RAID sets detected in
slots.
The array configuration is
valid and is currently
RAID1, but one slot is
marked as faulty.
The array configuration is
valid, but one slot is being
rebuilt from the other slot.
Neither slot contains a
valid array configuration.
MY BOOK STUDIO EDITION II
USER MANUAL
User Action
None
Both slots have valid array
configurations, but they do not
agree on the settings and the
device is not able to determine
which configuration is newer.
Install another drive that is not
part of a different RAID array.
Install the original drive that is
part of the RAID array.Create a
new array with the installed
drives.
RAID 1 only
Consult the slot status values
to determine which slot is
faulty and replace the drive.
RAID 1 only
Recovering from degraded
mode. Wait for rebuild to
complete. (This may take
several hours.)
Check disk status. See "Disk
Status Messages" on page 20.
WD RAID MANAGER FOR MAC – 19