Table of Contents
Advertisement
deRinse aid system
¡The water hardness level is 0 -
6 °dH. You can do without special
salt.
press.
1.
To open the basic settings,
2.
press.
aThe display shows H:xx. a
The display shows .
or press until the display shows
3.
H:00.
To save the settings,
4.
Press for 3 seconds.
aThe softening system is equipped
switches on and the salt refill
indicator is deactivated.
10.5 Regenerate the softening
system
In order to maintain the trouble-free
function of the softening system, the
device regenerates the softening
system at regular intervals.
In all programs, the water softener is
regenerated before the end of the
main wash cycle. The running time
and the consumption values increase,
e.g. B. Water and electricity.
Overview of the consumption values
when regenerating the
Softening system
Here you will find an overview of the
maximum additional running time and
consumption values when regenerating
the softening system.
Regenerating the softening
system after x rinsing
corridors
Additional term i
ten
Additional consumption of
in liters
30
3 seconds
6
6
n minute
Water 5
Additional consumption of electricity
in kWh
The consumption values given are
laboratory measurements according
to the currently applicable standard
and determined using the Eco 50°
program and the factory-set water
hardness value of 13 - 16 °dH.
11 Rinse aid system
11.1 Rinse aid
For best drying results, use rinse aid.
Use only household dishwasher
rinse aid.
Fill in rinse aid
When the rinse aid refill indicator
lights up, refill rinse aid. Use only
household dishwasher rinse aid.
The tab on the lid of the rinse aid
1.
reservoir
press and lift.
0.05
2
1
Advertisement
Table of Contents
