Sony HT-6500DP Owner's Record page 14

Speaker system hookup (continued)
Tip
Examples of poor conditions of the
speaker cord
Notes
_m_ng _o_ _o the _ _]d _I_r _r
To avoid shorbcircuiting the
speakers
Shot t-clrc_fing _["the speakers may damage
the _'c_iwr. _Tb_wnt this, m.ke sm_ to ta_e
the _bl:!owlng pre_a_tkms wh¢_ calme_fir_g the
spe_ers_
Make sure the stripped ends of each
speaker cord does not touch another
speaker terminal, the stripped end of
another speaker cord, or the me'tel parts of
the receiver.
Stripped speaker cord is touching another
speaker terminal.
Stripped cords are touching each other
due to excessive removal of insulation.
After connecting all the components,
speakers_ and AC power cord, output
a test tone to check that all the
speakers are connected correctly.
For details on outputting a test tone,
see page 20,
ff m_ sound is heard t¥om a speaker whi_e
o_tpt_ttb_g a test torte or a test to_le is output
_r(_n a _pt_ r other fht_llthe o_le w|lose n aisle
is c_u_ntl} displayed on the _iver, the
spewer may be shart-clrc.ulteA ffflfis happens,
chez'& the spewer connt;ctkm agai_l.
To avoid damaging your
speakers
Make sttre that yot_ tu_l dowr* the voltmie
before yot_ tt_rri off the _elver, When you ttm_
o_ rite rez_eiver, the vol_ne mmai_s at the level
you lur_ off the _z'g_iver,
14_s