Advertisement
_smrremote
control can work your" TV and
ome VCRs, Cable Boxes,
Satellite
Systems,
DBS, DVD Players,
etc'. However,
an easy one-
time step may be necessary
before the remote will
work your" other equipment.
Tr2v this initial check to see _f you need to go to the
following
section.
Place the TV/VCR/ACC
Mode Switch
in
the proper position
(VCR or ACC fMr other
devices)
fMr the device you want to control.
Point the remote
control
at the device and
press the POWER
button.
Does the remote turn the device ON'?
If YES, stop and try other function
buttons
on the remote.
If they also work the device,
then the remote
is ready and no further
steps are needed.
If NO, continue...
First look tip a THREE-DIGIT
remote
control
number
for your brand of device before going
through the simple steps on the following
page.
Find your three-digit
code on pages
33-34.
VCR
\
Satellite Receiver
I
I
Cable Converter
It is recommended that you use Philips
brand external accessory devices with your
Philips television to insure proper remote
control fi.mctions. If you are using Philips
brand accessory devices, your remote con-
trol should be ready to use with these
devices.
29
Advertisement
