Programmable One Finger Ad-Lib - Kawai SUPERBOARD FS800 Owner's Manual

Programmable ONE FINGER
AD-LIB: Creating Phrases
3. Inputting the new phrase.
Input new phrase using
this range. + Use the keys from C1 to A#4 to input the new phrase.
c
If you find that this range isn't high or low enough to
play the Ad-lib phrase you have in mind, press the B5
(OCTAVE SHIFT) key. This key can be used to shift the
range played by the keys from Cl to A#4 up or down
an octave, as shown in the diagram left.
oe normal oo Pressing the OCTAVE SHIFT key one time causes the
x1 keyboard to shift up one octave. Pressing a second time
y p &
~~ —_1r__, restores the keyboard to the normal pitch.
[down _| (up Pressing the OCTAVE SHIFT key a third time causes
x3 the keyboard to shift down one octave. Pressing a
{normal [has = fourth time restores the keyboard to the normal pitch.
—— — x2 You can also use the SOUND 1 volume buttons to set
the volume of the Ad-lib phrase which will be
memorized when you store the phrase.
4. Inputting additional Ad-Lib phrases.
Suppose you want to input a second Ad-Lib phrase. To
do this, make sure that your first customized Ad-Lib
phrase (from Step 3 above) is finished. Now, press the
POINT SELECT key (A# 5). This tells the F5800 that
you are done with the current phrase.
Now, repeat Steps 2 and 3 above to input a new Ad-Lib
phrase. When you are done with this second phrase,
press the POINT SELECT key again. You can continue
this process until all 17 Ad-Lib keys have been
programmed with your own customized phrases.
The next section will show you how to store your
newly created AD-LIB phrases.