Table of Contents
Advertisement
Input Jacks
BK-1632 STEREO MIXER
STACKING
GROUP
3F — MONITOR IN
3E — EFFECTS IN
BK-1632
ELECTRO-VOICE
BUCHANAN, Ml
49107
CAUTION
for continued
PROTECTION AGAINST FIRE
HAZARD REPLACE WITH SAME'
TYPE FUSE AS INDICATE0
REMPLACER PAR UN FUSIBLE DE
MEME TYPE COMME INDIQUE
95-130 VAC-
50/60 Hz 30 W*
0.3 AMP 250V
SLO BLOW FUSE
Hi
3G — AUX IN —»
1—3D — AUX RETURN
3C — EFFECTS RETURN
FIGURE 3 — Input Jacks
3C.
EFFECTS RETURN
The EFX RET jack accepts line level input signals
which can be set with the EFX RET level and the
EFX PAN front panel controls. This jack may be
used as a stacking input or a second auxiliary input.
3D. AUX RETURN
The AUX RETURN jack is used for signals to be
fed to the subgroup buses. The signal is controlled
by the AUX RETURN and AUX PAN front panel
functions The AUX RETURN is part of the "stack¬
ing group".
3E.
EFFECTS IN
The EFX IN jack will put line level signals directly
onto the effects bus. Crosstalk and buffering pro¬
tection are provided by the input circuit, signal level
is controlled by the external source. The EFX IN is
part of the "stacking group"
3F.
MONITOR IN
The MONITOR IN jack will put signals directly onto
the MONITOR bus. Crosstalk and buffering protec¬
tion are provided by the input circuit; signal level
is controlled by the external source. The MONITOR
IN is part of the ''stacking group"
3G. AUX IN
The AUX IN jack will put signals directly onto the
AUX bus. Crosstalk and buffering protection are
provided by the input circuit; signal level is
controlled by the external source. The AUX IN is
part of the "stacking group"
nine
Advertisement
Table of Contents
