Connections - Pioneer F-504RDS Service Manual

F-504RDS, F-504RDS-G
10. CONNECTIONS
CONNECTING THE AM
LOOP ANTENNA
1. Push down.
2. Insert the wire into the hole.
Accessory FM Dungeon eM 3. Release.
antenna
T-type antenna
Accessory AM
loop antenna
@ CONTROL
terminals
Antenna ground
Although grounding is not always
necessary for reception, it is
recommended for protection against Te-anAC wall
damage from lightning if an outdoor =OCher.
FM entenna is used. It is also
recommended for reducing noise and
hum.
CAUTION: Stereo amplifier
Never make the ground connection
2 : ae sparks can cause the
Pin plug connecting cord
Left channel
@ Connect the white plug to the white White plug
terminal {L) and the red plug to the red
terminal (R).
@ Make sure that the connections are
secure. Red plug
Z
oe
Right channel C
CONTROL Terminals
When using together with a Pioneer component bearing the
mark, connect the CONTROL IN terminal on the rear panel of
the tuner to the CONTROL OUT terminal on the component ao
using the supplied control cord. This will enable the tuner to be
controlled from a distance with the remote control unit supplied
with the component.
When this feature is not used, connection is not necessary.
@ For instructions regarding connection and operation, please
refer to the operating instruction manual of your stereo
component.
30