Page 1
TC-MC 355 Originalbetriebsanleitung Originele handleiding Metall-Trennmaschine Metaalsnijmachine Original operating instructions Manual de instrucciones original Metal cutting-off machine Tronzadora de metal Instructions d’origine Оригинальное руководство по Tronçonneuse à métaux эксплуатации Oтрезной станок по металлу Istruzioni per l’uso originali Troncatrice per metallo...
Page 5
Danger! - Read the operating instructions to reduce the risk of inquiry Caution! Wear ear-muff s. The impact of noise can cause damage to hearing. Caution! Wear a breathing mask. Dust which is injurious to health can be generated when working on wood and other materials.
2.2 Items supplied Important! Please check that the article is complete as When using the equipment, a few safety pre- speci ed in the scope of delivery. If parts are cautions must be observed to avoid injuries and missing, please contact our service center or the damage.
equipment properly you must also observe the Sound and vibration safety information, the assembly instructions and Sound and vibration values were measured in the operating instructions to be found in these accordance with EN 62841. operating instructions. sound pressure level ......92 dB(A) All persons who use and service the equipment uncertainty ..........
Page 8
6. Assembly 6.3 Miter cuts (Fig. 2,4) The vise can be swiveled from -15° to 45° in order to make miter cuts. Important! Always pull out the power plug • Slacken the two screws (16/17). before carrying out maintenance, resetting or •...
8. Cleaning, maintenance and screw (23) just enough to hold the wheel (11) securely in place and prevent it from spinning. ordering of spare parts Overtightening the shaft screw (23) may da- mage the cutting-off wheel. Always pull out the mains power plug before star- •...
9. Disposal and recycling The equipment is supplied in packaging to pre- vent it from being damaged in transit. The raw materials in this packaging can be reused or recycled. The equipment and its accessories are made of various types of material, such as metal and plastic.
Page 11
For EU countries only Never place any electric power tools in your household refuse. To comply with European Directive 2002/96/EC concerning old electric and electronic equipment and its implementation in national laws, old electric power tools have to be separated from other waste and disposed of in an environment-friendly fashion, e.g.
Service information We have competent service partners in all countries named on the guarantee certi cate whose contact details can also be found on the guarantee certi cate. These partners will help you with all service re- quests such as repairs, spare and wearing part orders or the purchase of consumables. Please note that the following parts of this product are subject to normal or natural wear and that the following parts are therefore also required for use as consumables.
Page 13
Warranty certi cate Dear Customer, All of our products undergo strict quality checks to ensure that they reach you in perfect condition. In the unlikely event that your device develops a fault, please contact our service department at the address shown on this guarantee card.