Advertisement
Available languages
Available languages
1. A well-ventilated place.
Take care not to use this unit in a place where it will not
receive
sufficient
ventilation,
and
not to permit
the
ventilation holes to be covered by curtains, or any similar
materials.
Power source
2. DC power cannot be used.
Handling the power cord
1. Never touch the power cord, or its plug, with wet hands.
2. Don't pull the power cord.
It water gets into the unit...
SERVICE MUST BE CARRIED OUT
BY DEALER OR OTHER QUALIFIED PERSON.
it operation seems abnormal ...
result in additional
damage
or some
other unexpected
damage or accident.
© Because the power source is located inside the unit, it is
normal for the cabinet to become warm.
A word about the power cord...
If the power cord is scarred, is partially cut or broken, orhasa
bad contact, it may cause a fire or serious electrical shock if
used. NEVER use a damaged power cord for any appliance.
Moreover, the power cord should never be forcibly bent.
Don't touch the inside parts of this unit.
Some places inside this unit have high voltage potential.
Never try to remove the top or back panels of this unit, or to
touch inside parts by hand or with tools.
The following suggestions wiil assist you in keeping the unit
in top condition.
e Be sure to switch the instrument off after use, and do not
switch the unit on and off in quick succession, as this
places an undue !oad on the electronic components.
© Tokeep the luster of the surface and buttons, simply use a
clean, damp cloth; polish with a soft, dry cloth. Polish may
be used but do not use thinners or petro-chemical-based
polishes.
e Awax-based polish may be used on the cabinet, although
you will find that rubbing with a soft cloth will suffice.
TH--O
S
n i
Advertisement
