Inserting The Batteries Into The Remote Commander (Only For Cdp-311) - Sony CDP-311 Operating Instructions Manual

Inserting the Batteries into
the Remote Commander (only
for CDP-311)
You can control the unit with the supplied
remote commander.
Insert two size AA (R6) batteries with the
correct polarity.
1 Slide the cover to remove it.
2 Insert two size AA (R6) batteries
correctly so that the © and ©
polarities match the polarity
diagrams inside the battery
compartment.
On battery life
* About half a year of normal operation can
be expected when using Sony
SUM-3 (NS) batteries.
* When the batteries are run down, the
remote commander will not operate the
unit. If this happens, replace both
batteries with new ones.
Notes on the remote commander
and remote control operation
* Keep the commander away from
extremely hot or humid places.
* Avoid dropping any foreign objects into
the commander casing, particularly when
replacing the batteries.
* Avoid exposing the remote sensor to
direct sunlight or lighting apparatus. Such
exposure can cause a malfunction.
* To avoid damage caused by battery
leakage and corrosion, remove the
batteries when the commander will not be
used for a long time.