Transferring Files - Oregon Scientific MP 820 User Manual

Slide the POWER switch to the "ON" position. Once the player is
connected to the PC via the supplied USB cable, the player's LCD
shows an icon signaling PC-to-audio player connectivity. If nothing
shows on the LCD, press MENU / ON / OFF once to turn on the player.
When plugged in, the player automatically begins charging. To charge
the player's internal battery to full capacity, wait for about 2 to 3 hours
before disconnecting.
NOTE: Windows
hardware has been found and automatically installs the software
drivers. If you have not installed the software, please first install the
program before connecting the device.

TRANSFERRING FILES

After connecting your player to the computer, the computer will detect
and identify the device as a removable storage drive, allowing you to
drag and drop files between your computer and your player.
1. Select the voice or MP3 / WMA files from your computer.
2. Drag and drop the selected files onto the Removable Disk.
NOTE: Your MP3 player is equipped for mass data storage support.
This means that it can also be used as a portable hard drive to store
and transport all forms of computer data files. You will not be able to
view or play any of the stored data unless it is one of the supported
audio formats:
•
•
•
NOTE: Do not disconnect the MP3 player from the computer while
transferring files otherwise the unit may not function because of damage
sustained to the software.
MP820 Eng r3
All manuals and user guides at all-guides.com
98 / 98SE
MP3 (Layer 3 MPEG-1, MPEG-2 and MPEG-2.5)
WMA (Windows Media Audio)
WAV (IMA ADPCM format)
5
based computers indicate that new
5
10/5/04, 11:20 AM