Program The Lock - Philips Home Access 4000 Series User Manual

Program the Lock

Attention
The default Master PIN Code is 12345678. Change the default Master PIN Code before programming the lock. The
indicator light will �ash red when the code entered is not saved successfully.
If no key is pressed for more than 10 seconds, the lock will exit programming mode.
Change the Default Master PIN Code
Press 2 times
Press 1 time
Change the Master PIN Code
Press 2 times
Enter new
Master PIN Code
Add a User PIN Code
Press 2 times
Enter new
User PIN Code
Enter Master
PIN Code
(default is 12345678)
Re-enter new
Master PIN Code
Enter Master
PIN Code
Press 1 time
Enter Master
PIN Code
Press 1 time
Press 1 time
Green light is on
Press 1 time
Green light is on
Press 1 time
Green light is on
Re-enter new
Master PIN Code
Press 1 time
Green light is on
Re-enter new
User PIN Code
Enter new
Master PIN Code
1
Press
Press 1 time
Green light is on
2
Press
Press 1 time
Green light is on
15