Panasonic NV- HD600 Series Operating Instructions Manual page 31

Before Requesting Service
Recording will not operate correctly
SYMPTOM
CAUSE
REMEDY
CHECKED
setting is incorrect.
$$$ ___|
VTR is not set for timer
Press TIMER REC after programming for timer
recording. recording.
{—----__--___|-.
——-+
Remote controller
does not operate
correctly.
Remote controller transmitter
beam is not reaching VTR.
Distance is too far.
Batteries are exhausted.
Replace batteries. Note precaution for replacement
on page 7.
Batteries are incorrectly fitted
with (+/—) reversed.
Fit batteries correctly as shown on page 7.
WM Hain Hint