Problem solving guide
Fault message at the end of a programme
Problem
Check dosage
Hygiene info: run a
programme at min.
75 °C or the "Clean
machine"
programme
The messages will appear at the end of the programme and when the washing
machine is switched on and need to be confirmed with the OK sensor control.
70
Cause and remedy
Excessive foam has built up during washing.
With TwinDos, check the dosage amount set.
Reduce the amount set in 10 % increments.
Use less detergent next time and follow the
manufacturer's instructions on dosage given on
the packaging.
When washing, a wash programme using a
temperature above 60 °C has not been run for a long
time.
Turn the programme selector to Further
programmes/.
Touch the sensor controls until
appears in the display.
Touch the OK sensor control.
The following appears in the display:
Touch the OK sensor control.
Run the
Clean machine
machine cleaner or a universal powder detergent.
This will clean the washing machine and prevent a
build-up of bacteria and odours.
Maintenance
Clean machine
programme using Miele