22
Locations and Functions of Parts
@® LOCK (lock) button and LOCK (lock) indicator
Locks the settings of knobs @ to @.
The LOCK indicator lights up when the settings have been
locked.
@ MASTER PEDESTAL (pedestal level) knob
Adjusts the output signal pedestal level for the R, G, B
channels simultaneously.
@® DETAIL (outline sharpness) knob
Adjusts the sharpness of outlines in the picture.
@®
GAIN (gain) knob
Adjusts the level of video output signals to compensate for
poor lighting conditions. The GAIN knob only works when
the "Gain" setting of the video camera. DXC-950/950P/
970MD (not supplied) has been set to "step". The gain may
be set from 0 dB to 18 dB.
@ «2 GAIN RED/BLUE (white balance adjustment)
knob
Adjusts the white balance.
RED: Adjusts the red gain.
BLUE: Adjusts the blue gain.
The GAIN RED/BLUE knob only operates when the
"WHT. Bal" setting of the DXC-950/950P/970MD video
camera (not supplied) has been set to "manu".
If you switch the <1 CAMERA/[2] REMOTE switch to
CAMERA or disconnect the control cable after setting
knobs @ to @ on the remote control unit, the settings will
revert back to those previously set in the camera.
<1 CAMERA connector
There are two screw holes in the bottom of the unit. These
allow the unit to be attached to a rack. For details on usage,
contact the store where you purchased the unit, or your
authorized Sony dealer.
@ © CAMERA (camera) connector (mini DIN, 8-pin)
Connects to the
remote connector on the video camera
DXC-950/950P/970MD (not supplied) using the supplied
connector cable.