Sony FD Trinitron WEGA KV-36XBR800 Operating Instructions Manual page 32
Hide thumbs
Also See for FD Trinitron WEGA KV-36XBR800:
- Operation instructions manual (93 pages) ,
- Operating instructions manual (89 pages) ,
- Brochure (2 pages)
Table of Contents
Advertisement
Notes on Using This Connection
Watch
the satellite
receiver
Press W/VIDEOrepeatedly
to select the VCR input (VIDEO 1 in the
illustration).
The VCR must be turned
on and set to the satellite receiver's
line input.
Watch the VCR
Press TV/VII)E0repeatedly
to select the input to which the VCR is connected
(VIDEO 1 in the illustration).
Set up the TV remote control
If you have a non-Sony
VCR or satellite receiver, you must program
the
to operate
the satellite
remote control. See "Programming
the Remote Control"
on pages 43-44.
receiver or VCR
Activate the TV remote
For the satellite receiver, press SAT/CABLE FUN(TION.For the VCR, ()pen the
control to operate
the satellite
outside cover, as shown on page 42. Then set the A/V slide switch to the
receiver or VCR
position
you programmed
for the VCR.
Control
satellite receiver and
See "Operating
a Satellite Receiver"
on page 60 and "Operating
a VCR" on
VCR functions
with the TV
page 60.
remote control
Label video inputs
to easily
See the instructions
for setting
up Video Labels on pages 74-75.
identify equipment
connected
to the TV
31
Advertisement
Table of Contents
