Troubleshooting - Sony IT-ID80 Operating Instructions Manual

ey
Troubleshooting
If you've experienced any of the following difficulties while using your
phone, use this troubleshooting to help you remedy the problem.
Should any problem persist, consult vour nearest Sony dealer.
Symptom
Remedy
You hear no dial tone.
* Make sure the telephone line cord is securely
connected to the telephone outlet.
The phone doesn't connect at
¢ Make sure the dialing mode is set correctly (page 9).
"al
on all, even though the number
o aus &
o you dial is correct.
e correctly. want to dial.
¥ ,
oe . soe You hear five short error beeps — ¢ The number you last dialed exceeds 32 digits
& when you try to redial. (including the tone and pause digits if used).
- ¢ The number vou last dialed is erased.
=
You can't hear anything from ¢ Use the SPEAKER VOLUME control on the base unit
the speaker. to increase the speaker volume.
The phone does not ring. ¢ Set the RINGER LEVEL switch to H or L (page 12).
You hear five short error beeps — * Make sure you follow the procedure in storing the
and can't store a one-touch/ number correctly (page 14).
Dn speed dialing number.
¢
@ You hear five short error beeps You pressed a one-touch dialing button or a speed
fe when you try to make a one- dialing number to which no phone number has been
5 __ touch/speed dialing call. stored.
€ ¢ One-touch or speed dialing numbers are erased
Memory dialing is incorrect.
than one minute.
* Store a correct number (page 14).
4®" | Additional information