Supplied Accessories - Philips AZ1021 User Manual

English
Congratulations on your purchase and wel-
come to Philips!
To fully benefit from the support that Philips
offers, register your product at
www.philips.com/welcome.

Supplied Accessories

– AC power cord
Top/front panels
1 VOLUME – adjusts volume level.
2 Source selector: CD,TUNER, OFF
– selects CD or radio source of sound
– power off switch
3 Display – shows the CD functions
4 2 ; – starts or pause CD playback
11 / 2 2
– selects the next/previous track
– searches forwards/backwards (press and
hold the button) within the current track
REPEAT – repeats a track/
CD program/entire CD.
5 PROG – programs tracks and reviews the
program
6 LIFT TO OPEN – opens/ closes the CD
7 TUNING – tunes to radio stations
8 SHUFFLE – plays all tracks in random order
9 BAND – selects waveband
0 9 STOP – stops CD playback;;
– erases a CD program
Back/bottom panel (
and
3)
! Telescopic antenna - improves FM
@ AC MAINS~ - inlet for power cord.
# DBB – turns the bass enhancement on/off.
$ p – 3.5 mm stereo headphone socket
Helpful hints: The speakers will be muted
when headphones are connected to the set.
(See 1)
door.
See 2
reception.
Controls/Power Supply
% Battery door – open to insert 6 x 1.5V
R-14/ UM-2/ C-cells
CAUTION
- Visible and invisible laser radiation.
If the cover is open, do not look at
the beam.
- High voltage! Do not open.You run
the risk of getting an electric
shock.The machine does not con-
tain any user-serviceable parts.
- Modification of the product could
result in hazardous radiation of
EMC or other unsafe operation.
This set complies with the radio
interference requirements of the
European Community.
Power Supply
Whenever convenient, use the power supply
cord if you want to conserve battery life.
Make sure you remove the plug from the set
and wall outlet before inserting batteries.
Batteries (not included)
1 Open the battery door and insert 6 batteries,
type R-14, UM-2 or C-cells, (preferably
alkaline) with the correct polarity as indicated
by the "+" and "–" symbols inside the com-
partment. (See 2)
2 Replace the battery door, making sure the bat-
teries are firmly and correctly in place.The set is
now ready to operate.
Batteries contain chemical substances, so
they should be disposed of properly.
• Incorrect use of batteries can cause electrolyte
leakage and will corrode the compartment or
cause the batteries to burst:
• Do not mix battery types: e.g. alkaline with car-
bon zinc. Only use batteries of the same type
for the set.
• When inserting new batteries, do not try to mix
old batteries with the new ones.
• Remove the batteries if the set is not to be used
for a long time.