3 Prepare
Always follow the instructions in this chapter in
sequence.
Connect speaker cables
Note
•
Insert the stripped portion of each speaker wire into
the socket completely.
•
For optimal sound, use the supplied speakers only.
1
Unscrew the speaker connectors.
2
Insert fully the end of a speaker cable with
red mark into the left red (+) connector.
3
Screw the left red (+) connector to secure
the cable.
4
Insert fully the end of a speaker cable
without red mark into the left black (-)
connector.
5
Screw the left black (-) connector to
secure the cable.
6
Repeat steps 2-5 to insert the other
speaker cable into the right connectors.
1
2
3
Connect power and switch
on
Caution
•
Risk of product damage! Make sure that the power
supply voltage matches the voltage printed on the
bottom of the unit.
•
Risk of electric shock! When you unplug the AC
adaptor, always pull the plug from the socket. Never
pull the cord.
•
Before you connect the AC adaptor, make sure that you
have completed all the other connections.
•
Connect the AC power cord to
• the AC IN ~ socket on the back of the
main speaker.
• the wall power socket.
» The unit switches on automatically.
» The power indicator blinks amber, and
after a while turns to solid amber.
•
To switch the unit to standby mode, press
the power button/indicator above .
•
To switch the unit on from standby mode,
press the power button/indicator above
again.
EN
7