Table of Contents
Advertisement
PRECAUTIONS
* Do not attempt to disassemble the camera.
To prevent electric shock, do not remove screws
or cover.
There
are no user-serviceable
parts
inside.
Refer servicing to qualified service personnel.
Handle the camera with care.
Do not abuse the camera.
Avoid striking or shak-
ing it. The camera could be damaged by improp-
er handling or storage.
Do not expose the camera to rain or moisture,
or try to operate it in wet areas.
Do take immediate action if ever the camera do
becomes wet.
Turn power off and refer servicing
to qualified service personnel.
Moisture can dam-
age the camera
and also create the danger of
electric shock.
* Never face the camera toward the sun.
Whether the camera is in use or not, never face it
toward the sun.
Do use caution when operating
the camera
in the vicinity of spot lights or other
bright lights and light reflecting objects.
Do not operate the camera beyond its
temperature, humidity or power source ratings.
Do not use the camera in an extreme environment
where
high temperature
or high humidity
exist.
Use the camera under conditions where tempera-
tures are within -10°C - +50°C (14°F - 122%), and
humidity is below 90%.
The input power source is
120V AC 60 Hz for WV-CP220,
12V DC for WV-
CP222 or 24V AC 60 Hz for WV-CP224.
Caution:
To prevent fire or shock hazard, the UL list-
ed wire VW-1, style 1007 should be used for
DC 12V or AC 24V Input Terminal.
Advertisement
Table of Contents
