Maintenance - D-Link DCS-6113 User Manual

Configuration
This chapter explains how to restore the camera to factory default, upgrade
firmware version, etc.
Reboot: This feature allows you to reboot the camera, which takes about one
minute to complete. When completed, the live video page will be displayed in your
browser. The following message will be displayed during the reboot process.
If the connection fails after rebooting, manually enter the IP address of the camera
in the address field to resume the connection.
Restore to default: This feature allows you to restore the camera to factory default
setting.
Export / Upload Files: This feature allows you to Export / Upload daylight saving
time rules, custom language files, and setting backup files.
Export daylight saving time configuration file: Click to set the start and end time of
DST.
Follow the steps below to export:
1. In the Export files column, click Export to export the daylight saving time
configuration file from the camera.
2. A file download dialog will pop up as shown below. Click Open to review
the XML file or click Save to store the file for editing.
3. Open the file with Microsoft
start and end time of DST.
4. When completed, save the file
Upload daylight saving time rule: Click Browse... and specify the XML file to
upload.
D-Link DCS-6112 /6113 / 6113V User Manual

Maintenance

Notepad and locate your time zone. Set the
®
69