Table of Contents
Advertisement
en Keep-warm function
15.3 Switching off PanBoost
Select the cooking zone.
1.
Keep-warm function
16 Keep-warm function
You can use this function to melt chocolate or butter,
and to keep meals warm.
You can activate the function via Home Connect or Fa-
vourite button.
16.1 Switching on Keep-warm function
Requirement: Assign the function to
→ "Favourite button", Page 12.
Select the required cooking zone.
1.
PerfectFry Sensor
17 PerfectFry Sensor
This function allows you to melt, prepare sauces, sauté,
deep fry or fry while keeping the temperature under
control.
Instead of constantly adjusting the power level during
cooking, select the required target temperature once at
the start. The sensors under the glass ceramic meas-
ure the temperature of the cookware and keep this
constant throughout the entire cooking process.
This function is available on all cooking zones marked
with this symbol
.
Functions
Temperature
Melting
70 - 80 ºC
Preparing sauces
110 - 120 ºC
Frying
140 ºC
Frying
160 ºC
Frying
180 - 200 ºC
Frying
220 ºC
17.1 Recommended cookware
Special cookware has been developed for this function,
which delivers the best results.
The recommended cookware is available from cus-
tomer service, specialist retailers or our online shop
www.bosch-home.com.
Note: You can also use other cookware. Depending on
the composition of the cookware, the achieved temper-
ature may differ from the selected temperature level.
17.2 Switching on the PerfectFry Sensor
1.
Place the empty cookware on a cooking zone.
Select the cooking zone.
2.
1
Available depending on software version. Further information on availability can be found on the website.
14
2.
a
a The function is switched off.
Note: To avoid high temperatures, this function auto-
matically switches itself off after 30 seconds.
1
2.
a The function is switched on.
16.2 Switching off Keep-warm function
1.
.
2.
a The function is switched off.
3.
a ,
4.
a
a The selected temperature and the development of
a The temperature shown on the displays is approxim-
a Once the temperature has been reached, a signal
5.
Note: If you need to cook with more than 250 ml oil,
add the oil and wait a few seconds before you add the
food.
17.3 Switching off PerfectFry Sensor
▶
17.4 Recommendations for cooking with
PerfectFry Sensor
The following table shows the ideal temperature levels
for a selection of dishes. The temperature
cooking time
and quality of the food.
Meat
Escalope, plain
Escalope, breaded
Fillet
Select the power level.
goes out
Touch
.
lights up.
Select the cooking zone.
Set to
goes out.
Press
.
and the preset temperature light up on the dis-
play for the selected cooking zone.
Select the temperature by swiping your finger over
the settings area.
flashes until the set temperature is reached again.
the temperature reached in the pan flash alternately
until the selected temperature has been reached.
ate and may differ from the actual temperature in
the frying pan.
tone sounds and as well as the temperature sym-
bol stop flashing.
Add the frying fat and then the food to the frying
pan.
Select the cooking zone and touch
depend on the amount, condition
160-180
180
180-200
.
and the
4-10
6-10
6-10
Advertisement
Table of Contents
