Install A Windows Operating System And Drivers - Lenovo ThinkPad X1 Nano Gen 2 User Manual

c. If you set a power-on password, a window pops up. Enter the correct password.
d. The User operation request window pops up. You are required to press a button on the connected
FIDO2 device, and then follow the on-screen instruction to close the window.
e. Press ESC to exit and restart your computer.
Notes:
• If you want to unregister your devices, click available FIDO2 device that you want to unregister in My
Device area and enter the correct power-on password for verification.
• If you use more than one FIDO2 devices with common identifier for registration, only one device could be
available.
Log in to the System with Passwordless Power-On Authentication
1. Restart the computer.
2. ThinkShield Passwordless Power-On Authentication window appears.
3. Insert your registered FIDO2 device for detection.
4. Then follow the on-screen instruction to press the button on your FIDO2 device for verification.
5. After your device is verified, the power-on process continues.
Note: You should insert the FIDO2 device or enter power-on password within 60 seconds. Otherwise,
your computer will shut down automatically.

Install a Windows operating system and drivers

This section provides instructions on installing a Windows operating system and device drivers.
Install a Windows operating system
Microsoft constantly makes updates to the Windows operating system. Before installing a particular
Windows version, check the compatibility list for the Windows version. For details, go to
support.lenovo.com/us/en/solutions/windows-support
Attention:
• It is recommended that you update your operating system through official channels. Any unofficial update
might cause security risks.
• The process of installing a new operating system deletes all the data on your internal storage drive,
including the data stored in a hidden folder.
1. If you are using the Windows BitLocker
Platform Module, ensure that you have disabled the feature.
2. Ensure that the security chip is set to Active.
a. Restart the computer. When the logo screen is displayed, press F1 to enter the UEFI BIOS menu.
b. Select Security ➙ Security Chip and press Enter. The Security Chip submenu opens.
c. Ensure that the security chip for TPM 2.0 is set to Active.
d. Press F10 to save the settings and exit.
3. Connect the drive that contains the operating system installation program to the computer.
4. Restart the computer. When the logo screen is displayed, press F1 to enter the UEFI BIOS menu.
5. Select Startup ➙ Boot to display the Boot Priority Order submenu.
38
X1 Nano Gen 2 User Guide
.
®
Drive Encryption feature and your computer has a Trusted
https://