Advertisement
Connecting A/V Device(s)
STEP: 5
9.
Make sure or if necessary turn power
off to all equipment before starting.
11.
Connect RCA cables from audio output
jacks on A/V device 1 to audio input jacks
labeled CD+G on the DA-1000 Pro.
Connect Power Amplifier(s) or Other Device(s)
STEP: 6
13. Connect RCA cables from audio input jacks on an
amplifier or other device to the audio output
jacks (1) on the DA-1000 Pro.
Connect Monitor(s)
STEP: 7
15. Connect RCA cable video input jack on
monitor device 1 to video output jack (1)
on the DA-1000 Pro.
Performing a Sound Check
STEP: 8
17. Make sure master music and microphone volume
levels are not over 50%. (This applies to the
source and amplifier levels as well).
19. Set SOURCE button to the player you
want as the current music source.
YOU ARE NOW READY TO PERFORM LIKE A PRO!
10.
Connect RCA cables from Video output
jacks on A/V device 1 to Video input
jacks labeled CD+G on the DA-1000 Pro.
Audio out
Video out
12.
Repeat steps for A/V device 2, using the A/V
input jacks labeled DVD on the DA-1000 Pro
14. (Repeat steps for a second amplifier or other device,
using the audio output jacks (2) on the DA-1000 Pro).
16.(Repeat steps for a second monitor device,
using the video output jack (2) on the DA-1000 Pro)
18. Plug microphone(s) to desired channels.
20. Play music from source and balance
microphone and music levels to your choice.
Video in
Advertisement
