Table of Contents
Advertisement
48987 rev3_Layout 1 02/09/2011 09:52 Page 5
Turbo Button
•
The Accents Hand Blender has 8 different speeds
as well as a Turbo Button (3).
Press the Turbo Button to run the Accents Hand
Blender on speed 8 for intermittent bursts.
Using the Whisk Attachment
Insert the Balloon Whisk (12) into the Whisk
1
Gearbox (11).
Place the assembled Whisk onto the Main Unit
2
(4), by aligning the release button indent on the
Whisk Gearbox with the Main Unit push until it
has clicked into place.
•
To avoid splashing, start the whisking on speed 1
and increase to speed 3 if required.
Do not use the turbo setting.
Notes
•
Your Accents Hand Blender is not suitable for
grinding coffee beans.
•
When chopping meat, ensure that all the bones
have been removed before adding to the
Chopping Bowl.
Top tips
•
When blending foods with strong colour (eg.
carrots), the plastic parts of the appliance may
become discoloured. Wipe with cooking oil to
clean any discoloured parts.
•
For blending and chopping, select a slow speed
for soft ingredients, increase the speed to
produce the consistency required.
•
Select a high speed for chopping or blending
hard ingredients.
•
When using the Blending Leg (6), start the
process by plunging the blender into the
ingredients. This will ensure all the ingredients are
pulled into the blade to be processed. Continue
this movement until the mixture is to the desired
consistency.
•
Do not lift the Blending Leg out of the mixture
completely when running, as splashing may
occur.
•
The Chopping Bowl (10) is not suitable for
grinding coffee beans.
Care and cleaning
•
WARNING: Always unplug the appliance from the
mains socket before cleaning and maintenance.
WARNING: Handle the blades with care as they
are sharp.
The Whisk Gearbox (11) and Chopping Bowl Lid
(9) should be wiped over with a warm soapy
cloth. Do not immerse these parts in water.
Clean the Main Unit (4) with a damp cloth and dry
all the parts thoroughly.
WARNING: Never immerse the Main Unit in water
or any other liquid.
Wall mounting
•
The Accents Hand Blender can be wall mounted
for convenient storage.
WARNING: Always ensure you are not drilling into
the wall adjacent to any electrical wires or pipes,
such as water or gas.
Do not mount the Wall Bracket (16) over or near
any portion of a heating or cooking appliance or
sink or basin.
Find a suitable position on the wall or cupboard
1
where the Accents Hand Blender is to be
positioned.
Mark the fixing points through the Wall Bracket.
2
If you are fixing to a solid brick or block wall, use
3
a 6mm masonry drill and drill to a depth of
25mm.
If fixing to a wood or cupboard surface, drill a
4
2mm pilot hole or use a bradawl.
5
Advertisement
Table of Contents
