Advertisement
4 Press the PF-1 key or hold the PF-1 or PF-2 key to program
the new function onto the desired key.
•
A tone sounds after pressing the PF-1 key, confi rming that the
function has been stored to the PF-1 press operation.
•
Two tones sound after holding the PF-1 key, confi rming that the
function has been stored to the PF-1 hold operation.
•
Three tones sound after holding the PF-2 key, confi rming that
the function has been stored to the PF-2 hold operation.
•
The press operation of the PF-2 key cannot be reprogrammed.
Attempting to do so causes an error tone to sound.
5 Repeat steps 2 and 3 to reprogram additional functions.
6 Hold the PTT switch for 3 seconds to save the settings and
exit Setting mode.
Note:
◆ This mode is effective when Voice Announcement is set in
English.
◆ The transceiver will automatically return to normal operation if
no action is performed for 20 seconds.
PROGRAMMABLE FUNCTIONS
■ None
No function is programmed for the key.
■ Calling Alert
A calling alert tone allows you to alert party members that
you are making a call. When making a call, fi rst hold down
this key.
•
While holding down the key, the calling alert tone will sound.
Release the key to end the tone, then hold down the PTT
switch and speak into the microphone to transmit.
■ Key Lock
Press and hold to lock/unlock the transceiver keys, and
a beep will sound. While Key Lock is active, the following
operations can be performed:
•
Squelch Off
•
Monitor
20
Advertisement
