Powering On/Off; Setting Up For The First Time - Zte Blade V50S Manual

2. Connect the charger to a standard AC power outlet. If the
phone is on, you'll see a charging icon such as
appear on the status bar.
3. Disconnect the charger when the battery is fully charged.
NOTE:
If the battery is extremely low, you may be unable to power on
the phone even when it is being charged. In this case, try again
after charging the phone for at least 20 minutes. Contact the
customer service if you still cannot power on the phone after
prolonged charging.

Powering On/Off


Press and hold the Power key to turn on your phone.

To power off, press and hold the Power key until the power
off/restart menu appears and then touch
NOTE:
If the screen freezes or takes too long to respond, try pressing
and holding the Power key for over 10 seconds to restart the
phone.

Setting Up for the First Time

When you first power on your phone after you purchase it or
reset it to factory settings, you need to do some settings before
using it.
Select the language and follow the on-screen prompts to set up
your phone.
21
> .