Gigabyte H610M GAMING WIFI DDR4 User Manual page 8

Storage Interface Š
USB
Internal
Connectors
Back Panel
Connectors
I/O Controller
Only for H610M GAMING WIFI DDR4.
j
Only for H610M D3H DDR4.
k
Chipset:
- 1 x M.2 connector (Socket 3, M key, type 2280/2260 PCIe 3.0 x4/x2 SSD
support) (M2P_SB)
- 1 x M.2 connector (Socket 3, M key, type 2280/2260 PCIe 3.0 x2 SSD support)
(M2Q_SB)
- 4 x SATA 6Gb/s connectors
Chipset:
Š
- 4 x USB 3.2 Gen 1 ports (2 ports on the back panel, 2 ports available through
the internal USB header)
- 2 x USB 2.0/1.1 ports available through the internal USB header
Chipset+2 USB 2.0 Hubs:
Š
- 6 x USB 2.0/1.1 ports (4 ports on the back panel, 2 ports available through
the internal USB header)
1 x 24-pin ATX main power connector
Š
1 x 8-pin ATX 12V power connector
Š
1 x CPU fan header
Š
2 x system fan headers
Š
2 x M.2 Socket 3 connectors
Š
4 x SATA 6Gb/s connectors
Š
2 x addressable RGB Gen2 LED strip headers
Š
1 x front panel header
Š
1 x front panel audio header
Š
1 x USB 3.2 Gen 1 header
Š
2 x USB 2.0/1.1 headers
Š
1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0/
Š
GC-TPM2.0 SPI V2 module only)
1 x serial port header
Š
1 x Clear CMOS jumper
Š
1 x PS/2 keyboard port
Š
1 x PS/2 mouse port
Š
2 x SMA antenna connectors (2T2R) j
Š
1 x D-Sub port k
Š
2 x DisplayPorts j
Š
1 x HDMI port
Š
2 x USB 3.2 Gen 1 ports
Š
4 x USB 2.0/1.1 ports
Š
1 x RJ-45 port
Š
3 x audio jacks
Š
iTE I/O Controller Chip
®
Š
- 8 -