Feature; Feature Options; Time Set; Sleep Timer - Vizio VW22L User Manual

®
VIZIO VW22L HDTV10T User Manual

4.4 Feature

4.4.1 Feature Options

Press the MENU button to activate the On Screen Display
(OSD). Select the FEATURE option to adjust the Time, Sleep
Timer, Advanced Video Menu, Password, Parental Control,
Analog Captions, Digital Captions, Digital Closed Caption, Input
Label, Component Set, and VGA Set settings.
Note: The options may vary depending on the selected Input
source mode.

4.4.2 Time Set

Select the Time Set option in the Feature submenu to set the current time.
Press the right arrow button to select from Alaska, Hawaii, Pacific, Central, Mountain or Eastern time
zones.

4.4.3 Sleep Timer

Select the Sleep Timer option in the Feature submenu to set the HDTV to turn off automatically.
Press the right arrow button to select from OFF, 5, 10, 15, 30, 45, 60, 90, 120, 180, or 240 minutes.

4.4.4 Advanced Video Menu

Select the Advanced Video Menu option in the Feature submenu to set the Noise Reduction, Color
Temperature, 3D Y/C and Dynamic Contrast.
The Noise Reduction may be set to OFF, Low, Mid or High. Use this feature to diminish picture artifacts
caused by the digitizing of image motion content that may be present in the picture.
The Color Temperature may be set to Cool, Normal or Warm.
The 3D Y/C may be set to ON or OFF.
The Dynamic Contrast may be set to ON or OFF. Large areas of darkness in a picture will result in a
lower Average Picture Level (APL) causing the overall picture to look too dark. Activate this feature to
raise the APL.

4.4.5 Password Set

Select the Password Set option in the Feature submenu to set the password for parental control options.
Press the right arrow button and the Password panel will be displayed. Enter the four digit password
using the number buttons on the remote control. Enter it a second time to confirm you entered it correctly.
Note: If you forget your password, entering 3448 will allow you to set a new password. This feature is not
available when HDMI, Component, or VGA is selected as the input source.
Version 7/14/2008 33
www.VIZIO.com