Table of Contents
Advertisement
Connecting Your Basic Set-Top Box
Using Composite Video
1.
Turn off the power to the HDTV and Set-Top Box.
2.
Using the AV Cable, connect the Video (yellow color)
connector on your Set-Top Box to the corresponding Video
(yellow color) connector in the AV1 (yellow color area) input
at the rear of the HDTV.
3.
Using the white and red connectors, connect the cable to
the audio output connectors associated with the Video
output on your Set-Top Box and connect the other end to the audio connectors associated
with the AV1 (yellow color area) input at the rear of the HDTV.
4.
Turn on the power to the HDTV and Set-Top Box.
5.
Select AV1 using the INPUT button on the remote or side of the HDTV, or directly by
pressing the AV button on the Remote Control.
Using Coax (RF)
1.
Turn off the power to the HDTV and Set-Top Box.
2.
Using a Coax (RF) cable, connect one end to the TV OUT (RF) on your
Set Top Box and the other end to the DTV/TV input at the rear of the
HDTV.
3.
Turn on the power to the HDTV and Set-Top Box.
4.
Select TV using the INPUT button on the remote or side of the HDTV, or directly by pressing
the TV button on the Remote Control.
5.
The most common channels; in which your TV must be at, are either channel3 or channel 4.
Please contact your signal provider to verify what channel the TV must be at.
Note: Refer to your Set Top Box user manual for more information
about selecting the video or RF output of the product.
Version 10/22/2008
20
www.VIZIO.com
VIZIO VS420LF1A User Manual
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
