Related Manuals for Sonance VISUAL EXPERIENCE Series
Summary of Contents for Sonance VISUAL EXPERIENCE Series
- Page 1 VISUAL EXPERIENCE SERIES VX42 | VX46 | VX62 | VX66 | VX82 | VX86 VX42R | VX46R | VX62R | VX64R | VX66R | VX82R | VX86R INS TAL L AT ION A ND S UPPOR T MANUAL...
-
Page 2: Installation
VX product. BOX CONTENTS ONE-STAGE INSTALLATION (1) Cutout Template/Quickstart Guide Leave the Sonance VX speaker module Flex Frame latches in the LOCKED position as supplied out (2) VX Model Speakers of the box. This will ensure that your VX speaker... -
Page 3: Two-Stage Installation
“+” to speaker “+” and amplifier “–” using a screw gun and go very slowly; never over to speaker “–”. tighten. Sonance Visual Experience Series Speakers feature an IMPORTANT: Adjusting the tension of the Roto-Lock exclusive integral RotoLock mounting system for quick ®... - Page 4 Remove the speaker module from the frame (see Tighten the four screws on the front baffle to clamp the Roto-Lock toggle feet into position, securing the Figure 7). speaker frame to the surface (see Figure 10). Figure 7: Remove Speaker Module from Frame Figure 10: Securing the Frame Reserve the speaker module in a safe place for step 8.
- Page 5 PAINTING THE GRILLES perforations. Sonance Visual Experience Series speaker grilles IMPORTANT: If you find any grille perforations that completely cover the exposed speaker frame, so only the grilles (not the speakers themselves) require painting.
- Page 6 TECHNICAL SPECIFICATIONS - 4 INCH RECTANGLE VX42 Tweeter 0.75” (19mm) cloth dome, Ferrofluid-cooled, acoustic back chamber Woofer 4.5” (114mm) textured polypropylene cone, rubber surround Dispersion Technology Sinusoidal textured waveguide Frequency Response 60Hz - 20kHz +/-3dB Impedance 8 ohms nominal; 6 ohms minimum Power Handling 5 watts minimum;...
- Page 7 TECHNICAL SPECIFICATIONS - 4 INCH ROUND VX42R Tweeter 0.75” (19mm) cloth dome, Ferrofluid-cooled, acoustic back chamber Woofer 4.5” (114mm) textured polypropylene cone, rubber surround, pivoting Dispersion Technology Sinusoidal textured waveguide Speaker Pivot Coincident Woofer + Tweeter Pivoting Frequency Response 60Hz - 20kHz +/-3dB Impedance 8 ohms nominal;...
- Page 8 TECHNICAL SPECIFICATIONS - 6 INCH RECTANGLE VX62 Tweeter 1” (25mm) cloth dome, Ferrofluid-cooled, acoustic back chamber Woofer 6.5” (165mm) textured polypropylene cone, rubber surround Dispersion Technology Sinusoidal textured waveguide Frequency Response 45Hz - 20kHz +/-3dB Impedance 8 ohms nominal; 6 ohms minimum Power Handling 5 watts minimum;...
- Page 9 TECHNICAL SPECIFICATIONS - 6 INCH ROUND VX62R Tweeter 1” (25mm) cloth dome, Ferrofluid-cooled, acoustic back chamber Woofer 6.5” (165mm) textured polypropylene cone, rubber surround, pivoting Dispersion Technology Sinusoidal textured waveguide Speaker Pivoting Coincident Woofer + Tweeter Pivoting Frequency Response 45Hz - 20kHz +/-3dB Impedance 8 ohms nominal;...
- Page 10 TECHNICAL SPECIFICATIONS - 8 INCH RECTANGLE VX82 Tweeter 1.2” (30mm) cloth dome, Ferrofluid-cooled, acoustic back chamber Woofer 8” (203mm) textured polypropylene cone, rubber surround Dispersion Technology Sinusoidal textured waveguide Frequency Response 38Hz - 20kHz +/-3dB Impedance 8 ohms nominal; 6 ohms minimum Power Handling 5 watts minimum;...
- Page 11 TECHNICAL SPECIFICATIONS - 8 INCH ROUND VX82R Tweeter 1.2” (30mm) cloth dome, acoustic back chamber, Ferrofluid-cooled Woofer 8” (203mm) textured polypropylene cone, rubber surround, pivoting Dispersion Technology Sinusoidal textured waveguide Speaker Pivot Coincident Woofer + Tweeter Pivoting Frequency Response 38Hz - 20kHz +/-3dB Impedance 8 ohms nominal;...
-
Page 12: Limited Lifetime Warranty
Sonance Dealer/Distributor, will be free from defective workmanship and materials for the life of the Product, except for the grille, which is warranted for five (5) years. Sonance will at its option and expense either repair the defect or replace the Product with a new or remanufactured Product or a reasonable equivalent.