Advertisement
Available languages
Available languages
16-ENn
Viewing images
You can view the still images recorded using this unit or a digital still camera on the
LCD
screen (MVC-FDR3/FDR3E only) or the TV. You can also play back six images at
a time from the floppy disk (INDEX screen).
To view on the TV, connect the TV as shown on page 7.
Turn on the power and insert the floppy disk.
PLAY
ACCESS lamp
MODE SELECT
(1) Press PLAY.
The PLAY lamp lights up.
I
feel
STANDBY C)
0
a
me
(2) To display the preceding image, select "«" with the control button, then press
it.
To display the next image, select "»1" with the control button, then press it.
When the indicators on the LCD screen are not displayed, press the left or right
side of the control button, or press 4 or pi of the Remote Commander, to
display the preceding or next image.
Note
When the ACCESS lamp is flashing, be sure not to shake or strike the unit. Do not turn
the power off or disconnect the power source.
The indicators during playback
Image quality
Protected image indicator
Remaining disk capacity
BITMAP indicator
appears when BITMAP
file of the image is
available.
Image number/Number
of stored images in the
floppy disk
Slide show indicator
SLIDE SHOW
PAUSE
File name
MVC
_ -
</>
buttons (single screen
mode) or <=/™®
buttons
(INDEX screen mode)
Recording date of the
MENU button
:
image
INDEX button
Remaining battery time
eee
indicator
To turn off the indicators
Press DISPLAY.
Advertisement
