Advertisement
TUNED
indicator
{Lights when the station frequency is received.)
MEMORY
indicator
MEMORY
key
Numeric
(1~ 10/0) keys
ae
VOLUME CONTA:
Display section
=
=
.
:
AUTO
STEREO
TUNED
MEMORY
soon
j SD SS LS ee
|
i
\
ee
Frequency display
Direct tuning
This method allows the desired frequency to be entered directly
using the numeric
keys, without using the TUNING
key
1. Press the DIRECT key.
2. Enter the frequency of the desired station with the nu-
meric keys.
@ When
all of the digits of the frequency
have
been en-
tered, the station is automatically received
@
|f the entered frequency is not in the receivable frequency
range, the frequency display blinks for 5 seconds,
and
the last station received is received again
Hf Preset tuning
By storing the frequencies of broadcasting stations in the preset
channels according to the instructions in the ''To preset sta-
tion frequencies"
section, any of the preset stations can
be
received by one-touch operation
Press the numeric key corresponding to the preset channel
of the desired station.
® The display shows the frequency of that station, and the
station is received.
LOLANESS
BAND
selector key
P.SCAN
key
DIRECT
key
Hf To preset station frequencies
1. Press the BAND selector key for the desired band (FM1,
FM2 or AM).
2. Tune in the desired station following the instructions in
the ''Tuning methods'' section.
3. Press the MEMORY
key.
® The MEMORY
indicator on the display lights.
4. Within 5 seconds after pressing the MEMORY key, press
the numeric key (1 to 10/0) corresponding to the preset
channel in which the frequency is to be stored.
® (fa frequency has already been stored under the select-
ed preset channel, the previously-stored frequency will
be replaced
by the new
frequency
5. Preset all desired frequencies by repeating steps 1 to 4
above.
@ Preset Scan
This function allows the preset stations stored in the preset
channels
to be received in sequence
for 5 seconds each
1. Press the P.SCAN key.
@ The frequency of each preset station is received for 5
seconds in sequence.
A preset channel in which no sta-
tion has been preset is skipped, and the scan operation
moves
to the next preset channel
2. To stop Preset Scan, press the P.SCAN key again.
@ The preset station being received when the key is pressed
is received continuously
Advertisement
