Use Openvpn To Access Your Home Network - TP-Link EX530v User Manual

Chapter 17
17 1

Use OpenVPN to Access Your Home Network

OpenVPN Server is used to create an OpenVPN connection for remote devices to
access your home network.
To use the VPN feature, you need to enable OpenVPN Server on your router, and install
and run VPN client software on remote devices. Please follow the steps below to set up
an OpenVPN connection.
Home Network
Step1 Set up OpenVPN Server on Your Router
1. Visit http://tplinkwifi.net
password you set for the router.
2. Go to Advanced >
Note:
• Before you enable VPN Server, we recommend you configure Dynamic DNS Service (recommended) or assign a
static IP address for router's WAN port and synchronize your System Time with internet.
• The first time you configure the OpenVPN Server, you may need to generate a certificate before you enable the VPN
Server.
3. Select the Service Type
4. Enter a VPN Service Port
should be between 1024 and 65535.
5. In the VPN Subnet/Netmask
to the device by the OpenVPN server.
6. Select your Client Access
remote device to access your home network; select
you also want the remote device to access internet through the VPN Server.
Router (VPN Server)
or http://192.168.0.1, and log in with your TP-Link ID or the
VPN > OpenVPN, and tick the box of
(communication protocol) for OpenVPN Server: UDP, TCP.
to which a VPN device connects, and the port number
fields, enter the range of IP addresses that can be leased
type. Select
INTERNET
Remote Devices
Enable VPN
Home Network Only
Internet and Home Network
VPN Server&Client
Server.
if you only want the
if
135