Maintenance; Troubleshooting Tips - Lasko AR122 Instruction Manual

Smart ceramic tower heater
Table of Contents

Advertisement

Available languages

Available languages

WARNING

MAINTENANCE

Always unplug the cord before moving, servicing or cleaning.
Never place the heater in or near water.
Clean the heater only with a vacuum equipped with a brush attachment; the vacuum will remove
the lint and dirt from inside the heater.
Vacuum intake grills every two weeks; this will help to maintain the optimum heater performance.
Never attempt to take apart the heater.
Clean the body of the heater with a soft cloth only.
Never use alcohol or solvents such as gasoline, benzene, paint thinner, or other harsh cleaners.

TROUBLESHOOTING TIPS

If your heater fails to operate, see below for a list of probable causes and solutions:
Be sure the power cord is plugged into a working electrical outlet.
Check your temperature setting. The heater may be off because it has reached the desired
temperature setting.
If your heater runs for several minutes and shuts off repeatedly, your heater may require cleaning.
See maintenance section above.
STORAGE: Store the heater with these instructions, in the original carton in a cool, dry place.
LUBRICATION: Motor is permanently lubricated. No maintenance is required.
DISPOSITION: Corrugated packaging materials are recyclable. For environmentally responsible
disposal of this product, contact your local waste service provider or visit www.1800recycling.com
SAFETY FEATURE
A Tip-Over switch is built in to prevent operation if the heater is tipped over or lifted.
A thermal overload protector is built in to prevent overheating.
If an overheat temperature is reached, the heater will automatically shut off.
It can only resume operation when the user resets the unit.
After pressing the power button to turn off the heater, there will be a 7-second cooldown period.
The fan blows for 7 seconds while the display counts down.
To Reset Heater:
Unplug the heater and wait 10 minutes for the heater to cool down.
After the heater has cooled down, plug the unit into a 120V~ electrical outlet and follow the
operation instructions described in this manual
To comply with UL 1278 safety standards, app operations will be restricted under the
following conditions: (Wi-Fi indicator ring will turn Red)
Product tips over or is moved
Someone presses a button on the unit
The unit doesn't receive an app command for 24 hours
If the Wi-Fi indicator ring is RED, press the WiFi button to reactivate the connection.
LASKO PRODUCTS, LLC LIMITED WARRANTY (VALID IN U.S. AND CANADA ONLY)
What this warranty covers: This product is warranted against defects in workmanship and/or materials.
How long this warranty lasts: This warranty extends only to the original purchaser of the product and lasts for three (3) years from the date of
original purchase or until the original purchaser of the product sells or transfers the product, whichever first occurs.
What Lasko will do: During the warranty period, Lasko will, at its sole option, repair or replace any part or parts that prove to be defective or
replace the whole product with the same or comparable model. For all warranty claims, the product must be returned to Lasko Products, LLC
at customer's expense with proof of purchase within the warranty period. Contact the Lasko customer service department to obtain a Return
Authorization ("RA") Do not return products without an RA or the warranty claim will not be processed.
What this warranty does not cover: This warranty does not apply if the product was damaged or failed because of accident, improper handling
or operation, shipping damage, abuse, misuse, or unauthorized repairs made or attempted. This warranty does not cover shipping costs for the
return of products to Lasko for repair or replacement. Lasko will pay return shipping charges from Lasko following warranty
repairs or replacement.
Any and all warranties, expressed or implied (including, without limitation, any implied warranty of merchantability), last three years from the date
of original purchase or until the original purchaser of the product sells or transfers the product, whichever first occurs and in no event shall lasko's
liability under any express or implied warranty include (i) incidental or consequential damages from any cause whatsoever, or (ii) replacement or
repair of any house fuses, circuit breakers or receptacles. Notwithstanding anything to the contrary, in no event shall lasko's liability under any
express or implied warranty exceed the purchase price of the product and any such liability shall terminate upon the expiration of
the warranty period.
Some states and provinces do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or
consequential damages, so these exclusions or limitations may not apply to you. This warranty gives you specific legal rights. You may also have
other rights which vary from state to state and province to province. Proof of purchase is required before a warranty claim will be accepted.
CUSTOMER SERVICE:
Email: producthelp@lasko.com. Web: www.lasko.com
Our Customer Service team is available to assist you with product service questions and replacement parts. They can be reached Monday through
Friday, 8am-9pm Eastern. Please have your model number available, as well as the type and style (located on the underside of your product).
Customer Service Dept.,
820 Lincoln Ave., West Chester, PA 19380 (Please do not send product to this location)
Rev.B 10/23
TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK OR PERSONAL INJURY, ALWAYS FOLLOW
THESE IMPORTANT SAFETY INSTRUCTIONS AND WARNINGS:
AUTO-DIMMING DIGITAL DISPLAY
After 10 seconds the lights on the display will automatically
dim. Touching any button will reilluminate the lights to 100%.
OVERRIDING SMART FUNCIONS
(Perform one of the steps below)
• Press desired button on the product to override any
smart remote setting.
• Reset the device to forget any connected devices
(factory reset - hold Wi-Fi Button for 5 seconds).
• Unplug the unit from the wall to prevent smart remote
access.
VOICE COMMANDS
See quick pairing guide for smart speaker set up
Here is the list of Google and Alexa Commands:
Google
Hey Google, turn my Tower Heater ON / OFF.
.
®
Hey Google, set Tower Heater to medium heat.
Hey Google, set Tower Heater temperature to
70 degrees.
Hey Google, set Tower Heater countdown to 2 hours .
Hey Google, turn on the oscillation for Tower heater.
Hey Google, turn off the display on the Tower heater.
Alexa
Hey Alexa, turn my Tower Heater ON / OFF.
Hey Alexa, set Tower Heater to medium heat.
Hey Alexa, set Tower Heater temperature to 70 degrees.
Hey Alexa, set Tower Heater countdown to 2 hours .
Hey Alexa, turn on the oscillation for Tower heater.
Hey Alexa, turn off the display on the Tower heater.
4
Manual printed in China
AR122ES

Advertisement

Table of Contents
loading

Table of Contents