Advertisement
Quick Links
Advertisement
Summary of Contents for Namron ZIGBEE LED DIMMER 2.0
- Page 1 INSTRUCTION MANUAL NAMRON ZIGBEE LED DIMMER 2.0...
-
Page 2: Warnings And Cautions
NAMRON ZIGBEE LED DIMMER 2.0 Model No. 4512750,4512751 Rated Voltage 220-240V～ Rated Frequency 50Hz Rated Wattage 300W Incandescent:15W-300W LED/CFL:3W-200W Load Range :3W-200W :3W-100W Dimming Method Phase-cut Temperature：-10℃ - 35℃ Working Environment Humidity： 10% R.H. - 90% R.H. 71mm×71mm×52mm Model Size (L×W×H) -
Page 3: Functional Specifications
2. Splicing Design Drive Component Panel Operation Component 3. Functional Specifications ②Input and Output Terminals ①Status Indicator ③Push-button Rotary Switch 3.1 Status Indicator 3.1.1 Indicator lights blue and flash: Enter to Zigbee mode connection. 3.2 Input and Output Terminals 3.2.1 N: Input terminal (Connect the neutral and live wire “N”) 3.2.2 L: Input terminal (Connect the live wire “L”) 3.2.3: Output terminal (Connect the bulbs) 3.2.4 P: Signal input terminal (Connect the self-reset switch-output terminal) -
Page 4: T Ools Needed T O Install
then the APP can connect the dimmer when the bulb flash once and the status indicator turn blue and flash. (①If failed to connect,APP will exit the network mode after three minutes.②During the network connection,the lamp may flicker if the light is in the brightest.After the network is success- fully configured or the network is been withdrawn, the lamp will return to normal). - Page 5 Oneself-resetswitchcontrolmultipledimmerswiringdiagram P u s h s w itc h ( S e lf-r e s e t s w itc h ) Multipleself-resetswitchescontrolmultipledimmerswiringdiagram P u s h s w itc h P u s h s w itc h (S e lf-re s e t (S e lf-re s e t s w itc h ) s w itc h )
- Page 6 Multipl self-reset switches control one dimmer wiring diagram P ush sw itch P ush sw itch (S e lf-re set (S e lf-res et s w itc h) s w itc h) One self-reset switch control multiple dimmers wiring diagram P u s h s w i t c h ( S e lf - r e s e t s w i t c h )
- Page 7 5.4.5 Install the Operation Component to the Fixing Panel and put them together to the Drive Component. 6. User Instructions 6.1Function Instructions T able 1 1-way application function Dimmer F F unction Dimmer Operation Way Operation Operation Continuous short press the push-button rotary √...
- Page 8 F F unction Dimmer Operation Way Dimmer Self-reset Operation Switch Operation Operation Continuous short press the √ × × Network Mode push-button rotary dimmer seven times √ √ √ ON/OFF Short press the push-button rotary switch one time √ √ √...
-
Page 9: Troubleshooting
Turn power on Fuse burn out Change fuse Lights does not turn on Lamp burned out Change lamp Lamp neutral connection Reconnect the lamp neutral is not wired Importer: Namron AS Nedre kalbakkvei 88 B 1081 Olso Norway Made in China...