Panasonic TC-P42X1 Quick Start Manual page 29
42"/50" class 720p plasma hdtv 41.6/49.9 inches measured diagonally
Hide thumbs
Also See for TC-P42X1:
- Operating instructions manual (172 pages) ,
- Service manual (108 pages) ,
- Technical manual (77 pages)
Table of Contents
Advertisement
(Continued)
AdJustments/Configurations
(alternatives)
Sets the mode to select
the channel
with Channel
up/down
button
(All/Favorite/Digital
Only/Analog
only)
÷ Favorite:
Only channels
registered
as FAVORITE
(p. 20)
Selects
the screen menu language
(p. 16)
[Language
Adjusts
the clock (p. 17)
[Clock
Sets channels
(p. 39)
ANT/Cable
setup
]
]
]
Selects
the terminal
and label of the external
equipment
(p. 41)
Prevents
"Image retention"
with Wobbling.
(Automatic/Periodic)
÷ Automatic:
Shifts the display
image automatically.
÷ Periodic:
Shifts the display image every (1/2/3/4) minutes according to what was set in the "Time (minutes)" menu.
Sets the time for "Pixel orbiter-Periodic"
setting.
(1121314)
Change the brightness
of the side bar (OfflDarklMidlBright)
(4:3 mode only)
÷ The recommended
setting
is "Bright" to prevent
panel "Image retention".
(p. 48)
Press "OK" to start horizontal
"Scrolling"
on the screen
(p. 48)
Controls
equipment
connected
to HDMI terminals
(p. 32) (On/Of0
÷ "Power off link", "Power on link", and "Default
speakers"
cannot be selected
if "Off" is set.
Sets "Power
on link" of HDMI connection
equipment
(p. 32) (Yes/No)
Sets "Power
off link" of HDMI connection
equipment
(p. 32) (Yes/No)
Set "Stand-by
power save" of HDMI connection
equipment.
(p. 32) (No/Yes)
Set "Auto power stand-by"
of HDMI connection
equipment.
(p. 32)
(No/Yes
(with
reminder)/Yes
(no reminder)
Selects
the default speakers
(p. 32) (TV/Theater)
To conserve
energy, the TV automatically
turns off when NO SIGNAL and NO OPERATION
is performed
for more than 10 minutes.
(Enable/Disable)
Note
÷ Not in use when setting "Auto power on", "On/Off Timer", "Lock",
"SD mode" or Digital channel.
÷ "No signal for 10 minutes
was activated"
will be displayed
for about 10 seconds
when the TV is turned
on for the first time after turning the power off by "No signal for 10 minutes".
÷ The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining
minutes prior to the shut-off.
To conserve
energy, the TV automatically
turns off when no operation
of remote
or side panel key
continues
for more than 3 hours.
(Enable/Disable)
Note
÷ Not in use when setting "Auto power on" or "On/Off Timer".
÷ "No activity for 3 hours was activated"
will be displayed
for about 10 seconds
when the TV is turned on
for the first time after turning
the power off by "No activity
for 3 hours".
÷ The on-screen display will flash 3, 2 and 1 to indicate the last three (3) remaining
minutes prior to the shut-off.
Turns TV On automatically
when the cable box or a connected
device
is turned On (No/Yes)
÷ The "Sleep" timer, "On / Off timer", and "First time setup" will not function if "Auto power on" is set. (p. 42)
Set "Thumbnail"
or "Slideshow"
to play back SD cards automatically.
(Slideshow/Thumbnail/Set
later/OrB
Displays TV version and software license.
Performing Reset will clear all items set with Setup, such as channel settings. (p. 38)
[Pixel orbiter _]
[Time(minutes)_]
[4:3 side bars_]
[Scrolling bar
]
[v,ER`` Unk_]
IP......
link_l
!.oa v,, fof3..our
]
[Auto poweron_]
[,,bout
]
[Reset
to defaults
]
@
.._. -r
"c_o
E'_
Pc-
r'-
Adjustments/Configurations
(alternatives)
Sets the mode to select the channel with Channel
up/clown
button (All/Favorite/Digital
Only/Analog
only)
Sets favorite
channels.
(p. 20)
Changes
the station
identifier.
(p. 39)
Checks the signal strength
if interference
or freezing
occurs
on a digital
image. (p. 39)
29
Advertisement
Table of Contents
