Sharp 50BL2EA Service Manual page 52

FAQ:
1. If you found there isn't any print on serial tool when you AC on
Plz upgrade mboot by ISP_Toll
2. If you cannot read Device ID
You can slow the I2C speed according to the follow picture
3. If you see a "burning screen" or "black screen"
It means panal setting is wrong. You need to change panel setting. Plz follow steps below
• Download the correct {panel setting file} in link:
https://drive.cvte.com/p/DbCbN-IQpBQYz8gD
• Download the Customer_1.ini:
https://drive.cvte.com/p/DXycY4cQpBQY0cgD
Customer_1.ini is the model config file. Open this file, find "m_pPanelName" and "m_
p4K540_240PPanelName" below the tag [panel]
Change file name to the name of the {panel setting file} you download.
52