Pentax IQZoom 135 M Operating Manual page 37

Correcting the date
Switch the power on.
1. Pressing the DATE button for 3 seconds:
the "Year" digits and will blink.
2. Each time the DATE button Is depressed,
the blinking digits changes in the follow¬
ing manner:
Year - Month - Day - Hours - Minutes
Release the button when the desired digits
appear.
3. Move the zoom lever on the right or left
side when you wish to change the blinking
digits. The digits increase by one each
time the zoom lever moves to the right and
the digits decreases by one each time the
left zoom lever moves to the left. Holding
the zoom lever for about one second will
change the data continuously.
4. After the data has been adjusted, depress
the DATE button repeatedly until blinking
stops.
• The blinking "minutes" allows precise fine-tun¬
ing of the internal clock to the beginning of a
specified minute. When "minutes digits" are
blinking, depress the DATE button in sync with
a time signal.
• If you release the shutter while the blinking
data is being corrected, the data will not be
imprinted.
• If there is a white or yellow object in the corner
of the picture where the data is imprinted, the
data may be difficult to read. When composing
your photographs, try to avoid brightly-colored
subjects in that corner.
35