Sony BRAVIA KDL-65W5100 Operating Instructions Manual page 9

[] LAN Connects to an existing network using an Ethernet cable. Be sure to complete
Network Setup (page 16).
[] DMei)SERvicE This USB pori is only for service uniess you are conneciing an opiionai BRAviA ............
Link module (DMeX).
[] Tlli inpui p o;iZmheu ed composiie video inpuiNiDEo ii oras omponeni
COMPONENT video input (COMPONENT 1). For composite use, connect the yellow jack to Y for if}
IN 1 (1080p/
video and use audio (L/R) for audio signals. For component connection, use Y, PB,
1080i/720p/
PR for video signals and also connect the audio (L/R) for audio signals. _
480p1480i)1
By default, this TV will automatically detect and switch between VIDEO 1 and
COMPONENT 1. To manually set the input type, press
HOME, select Settings,
L-AUDIO-R
then Channels & Inputs, then select Video/Component 1 Selection. _.
[]
COMPONENT
Component vide() provides hetter picture quality than the S Vide() and composite O_
IN 2
video.
Audio connection is required for the COMPONENT IN ports, connect audio (L/R).
[]
AUDIO OUT
Connects to the left and right audio input jacks of your analog audio equipment. You
(VAR/FIX)
can use these outputs to listen to your TV's audio through your stereo system.
[] HDMi iN 1/2/3/4 HDMi
iHigb2Definiiion Muiiimedia inierfacei provides an uncompressedl ali2
L-AUDIO-R
digital audio/video interface between this TV and any HDMI-equipped audio/video
equipment, such as a set-top box, DVD player, and A/V receiver. HDMI supports
enhanced, or high-definition video, plus digital audio. Be sure to use only an HDMI
cable that bears the HDMI logo.
Use the HDMI IN 1 port when connecting DVI equipment with a DVI-to-HDMI
cable or adapter (not supplied). Equipment using a DVI connection also requires an
additional audio connection using an audio cable connected to AUDIO (L/R).
[] DIGITAL AUDIO Connects to the optical audio input of digital audio equipment that is PCM/Dolby*
OUT (OPTICAL) Digital compatible.
[] AC IN Connects to your power source. Connect the supplied power cord to AC IN and the
nearest wall outlet.
[]
CABLE/
RF input that connects to your cable or over-the-air antenna.
ANTENNA
[]
USB
Connects to USB equipment to access photo, music, and video tiles.
[] PC IN Connects to a personal computer's video and audio output connector. Can also be
(RGB/AUDIO) connected to other analog RGB equipment.
For some Apple Macintosh computers, it may be necessary to use an adapter (not
supplied). If an adapter is used, connect the adapter to the computer before
connecting the HD 15-HD 15 cable.
You may need to adjust the TV settings or your PC's resolution and timing (see
page 12).
[]
VIDEO IN 2
Connects to the S VIDEO output jack of video equipment. If both composite video
S VIDEO/VIDEO and S VIDEO are connected, S VIDEO signal has priority.
L (MONO)- If you have mono equipment, connect its audio output port to the TV's L (MONO)
AU DIO-R audio input port.
* Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
9