Stand Installation - Mitsubishi Electric unisen 154 Series Basic Owner's Manual

5
Stand installation
Note
• 40= or 46=inch TV: If planning to wall-mount the TV, there is no need to install the stand.
55=inch TV: The TV comes from the factory with the stand pre-installed.
Required: Phillips Screwdriver ('--_---']
Extension pieces
on back of stand
[]
[]
[]
[]
BACK
DO support the TV
under the corners.
DON'T place your hand where it can
get caught under the TV.
Two adults are required to lift the TV.
TV in protective
wrapping
Repacking the Stand
CAUTION.
Place the
stand in the foam insert
with the extension pieces
facing away from the TV.
Otherwise, the TV will be
damaged in transit.
Protect the TV and
stand with the original
packing material.
Extension pieces on stand
must face out, away from TV.
For assistance call 1(800} 332-2119